首要使用串口线将计算机的串行口1（或2）与交换机的Console口连接起来，然后将三层交换机加电，进行发起。再在计算机上实行“开始菜单”
“附件”
“通讯”
“超级终端”，运行“Hypertrm.exe”。

(First, use the serial cable to connect the serial port 1 (or 2) of the computer with the console port of the switch, and then power on the three-layer switch to initiate. Then execute the "Start Menu" on the computer
"appendix"
"communication"
"Hypertrm", run "Hypertrm.exe".)

[下载]16053378583.rar

2022-8-10 16:05 上传

文件大小: 450 KB
下载次数: 0

首要使用串口线将计算机的串行口1（或2）与交换机的Console口连接起来，然后将三层交换机加电，进行发起。再在计算机上实行“开始菜单”
“附件”
“通讯”
“超级终端”，运行“Hypertrm.exe”。

(First, use the serial cable to connect the serial port 1 (or 2) of the computer with the console port of the switch, and then power on the three-layer switch to initiate. Then execute the "Start Menu" on the computer
"appendix"
"communication"
"Hypertrm", run "Hypertrm.exe".)

[下载]16053378583.rar

2022-8-10 16:05 上传

文件大小: 450 KB
下载次数: 0