找回密码
 立即注册
固件字库thefirmware | 家庭/个人应用 2022-09-06 69 0star收藏 版权: . 保留作者信息 . 禁止商业使用 . 禁止修改作品
WINDOWS下升级字库和打印机固件方案首要安装打印机WINDOWS驱动,安装时候特别注意波特率是不是与打印机自查看共同,端口号是不是准确,还有默许数据位改成8aip46mch.hex?为4610-1nr17.08固件DBCS/chnm1381为4610-1NR简体中文字库补白:烧写固件时间比烧写字库时间长(约3倍)固件文件大约3兆,字库文件约1M.BY:华诺得孙工,QQ:896739739

(To upgrade the font library and printer firmware under WINDOWS, firstly install the printer WINDOWS driver. When installing, pay special attention to whether the baud rate is the same as the printer's self-checking, whether the port number is accurate, and the default data bit is changed to 8aip46mch.hex? It is 4610-1nr17 .08 Firmware DBCS/chnm1381 is 4610-1NR Simplified Chinese Font Filler: It takes longer (about 3 times) to burn the firmware than to burn the font. The firmware file is about 3MB, and the font file is about 1M. :896739739)

[下载]15281926111.rar




上一篇:cisco-sso_10_v7
下一篇:4610-1NR 模式调整配置方法