找回密码
 立即注册
线槽the固定fixed | 家庭/个人应用 2022-08-29 66 0star收藏 版权: . 保留作者信息 . 禁止商业使用 . 禁止修改作品
垂直敷设的线槽必须按底架安装,水平部分用支架固定。固定支点之间的距离要基于线槽具体的负载量在1.5至2米之间。在进入接线盒、箱柜、转弯和变形缝两端及丁字接头不大于0.5米。线槽固定支点间距离偏差小于50毫米。底板离终点50MM处均应固定

(Vertically laid wire ducts must be installed according to the chassis, and the horizontal part shall be fixed with brackets. The distance between the fixed fulcrums should be between 1.5 and 2 meters based on the specific load of the trunking. It is not more than 0.5 meters at both ends of entering junction boxes, cabinets, turning and deformation joints and T-joints. The deviation of the distance between the fixed fulcrum of the wire groove is less than 50 mm. The bottom plate should be fixed at 50MM from the end point)

[下载]12192588317.rar




上一篇:思科产品手册_2010年3月版
下一篇:IPV6技术、部署与应用