现场操作，一步步教你熔接光纤
随着网络的飞速发展，传统的10M，100M速度已经越来越满足不了人们日常学习办公的需要了。用户迫切希望提高网络速度，1000M是目标，但用于双绞线来说虽然可以使用六类线满足1G的传输需要，但六类线制作起来非常烦恼，而且对两端连接设备要求也很高，各项衰减参数也不能降低要求。因此目前最有效的突破1G传输速度的介质仍然是光纤。本文将为读者介绍如何使用工具将断纤尾纤进行熔接，满足实际需求。
1，熔接办公何时进行？
大家都应该认识光纤是非常长的，但任何线缆都会遇到长度不合适的问题，光纤也是如此，这时候就需要对光纤进行裁剪了。并且光纤在户外传输时都是一股的，而连接到局端就需要将里头的线芯分开连接，这时也需要对光纤进行熔接。因此可以说熔接办公用到的地方还是不少的，使用了光纤就必定会有熔接问题。
2，如何进行光纤的熔接？
光纤熔接在以前是一个技术含量很高的办公，以前熔接一个纤芯的办公能拿到500元的报酬，而如今恐怕只有1/10了。下面大家将一步步的为大家介绍如何将分离的光纤熔接到一起。不过看完后理论的工具理解很多，真正掌握还需要大家亲自去动手。
第一步：准备办公
光纤熔接办公不仅需要专业的熔接工具还需要很多普通的工具辅助实现这项任务，如剪刀，竖刀等。（如下图）
112276

(On-site operation, teach you step-by-step fiber splicing
With the rapid development of the network, the traditional 10M and 100M speeds can no longer meet people's daily study and office needs. Users are eager to improve the network speed, and 1000M is the goal, but for twisted pair cables, although Category 6 cables can be used to meet the needs of 1G transmission, Category 6 cables are very troublesome to make, and the requirements for connecting devices at both ends are also very high. , the attenuation parameters can not reduce the requirements. Therefore, the most effective medium for breaking the 1G transmission speed is still optical fiber. This article will introduce to readers how to use tools to splicing broken fiber pigtails to meet actual needs.
1. When will the welding office be carried out?
Everyone should know that the optical fiber is very long, but any cable will encounter the problem of inappropriate length, and the same is true of the optical fiber. At this time, the optical fiber needs to be cut. In addition, the optical fibers are all in one piece during outdoor transmission, and when connecting to the central office, the cores inside need to be connected separately. At this time, the optical fibers also need to be spliced. Therefore, it can be said that there are still many places where fusion splicing is used in the office. If optical fibers are used, there will be fusion splicing problems.
2. How to splicing optical fibers?
Fiber splicing used to be a highly technical office. In the past, an office that spliced ??a fiber core could get a salary of 500 yuan, but now it is only 1/10. Below, we will introduce step by step how to splicing the separated optical fibers together. However, after reading the theoretical tools, I understand a lot, and you need to do it yourself to truly master it.
Step 1: Prepare for Office
Optical fiber splicing office not only requires professional splicing tools but also many common tools to assist in this task, such as scissors, vertical knives, etc. (As shown below)
112276)

[下载]15532701388.rar

2022-8-25 15:53 上传

文件大小: 163 KB
下载次数: 0

现场操作，一步步教你熔接光纤
随着网络的飞速发展，传统的10M，100M速度已经越来越满足不了人们日常学习办公的需要了。用户迫切希望提高网络速度，1000M是目标，但用于双绞线来说虽然可以使用六类线满足1G的传输需要，但六类线制作起来非常烦恼，而且对两端连接设备要求也很高，各项衰减参数也不能降低要求。因此目前最有效的突破1G传输速度的介质仍然是光纤。本文将为读者介绍如何使用工具将断纤尾纤进行熔接，满足实际需求。
1，熔接办公何时进行？
大家都应该认识光纤是非常长的，但任何线缆都会遇到长度不合适的问题，光纤也是如此，这时候就需要对光纤进行裁剪了。并且光纤在户外传输时都是一股的，而连接到局端就需要将里头的线芯分开连接，这时也需要对光纤进行熔接。因此可以说熔接办公用到的地方还是不少的，使用了光纤就必定会有熔接问题。
2，如何进行光纤的熔接？
光纤熔接在以前是一个技术含量很高的办公，以前熔接一个纤芯的办公能拿到500元的报酬，而如今恐怕只有1/10了。下面大家将一步步的为大家介绍如何将分离的光纤熔接到一起。不过看完后理论的工具理解很多，真正掌握还需要大家亲自去动手。
第一步：准备办公
光纤熔接办公不仅需要专业的熔接工具还需要很多普通的工具辅助实现这项任务，如剪刀，竖刀等。（如下图）
112276

(On-site operation, teach you step-by-step fiber splicing
With the rapid development of the network, the traditional 10M and 100M speeds can no longer meet people's daily study and office needs. Users are eager to improve the network speed, and 1000M is the goal, but for twisted pair cables, although Category 6 cables can be used to meet the needs of 1G transmission, Category 6 cables are very troublesome to make, and the requirements for connecting devices at both ends are also very high. , the attenuation parameters can not reduce the requirements. Therefore, the most effective medium for breaking the 1G transmission speed is still optical fiber. This article will introduce to readers how to use tools to splicing broken fiber pigtails to meet actual needs.
1. When will the welding office be carried out?
Everyone should know that the optical fiber is very long, but any cable will encounter the problem of inappropriate length, and the same is true of the optical fiber. At this time, the optical fiber needs to be cut. In addition, the optical fibers are all in one piece during outdoor transmission, and when connecting to the central office, the cores inside need to be connected separately. At this time, the optical fibers also need to be spliced. Therefore, it can be said that there are still many places where fusion splicing is used in the office. If optical fibers are used, there will be fusion splicing problems.
2. How to splicing optical fibers?
Fiber splicing used to be a highly technical office. In the past, an office that spliced ??a fiber core could get a salary of 500 yuan, but now it is only 1/10. Below, we will introduce step by step how to splicing the separated optical fibers together. However, after reading the theoretical tools, I understand a lot, and you need to do it yourself to truly master it.
Step 1: Prepare for Office
Optical fiber splicing office not only requires professional splicing tools but also many common tools to assist in this task, such as scissors, vertical knives, etc. (As shown below)
112276)

[下载]15532701388.rar

2022-8-25 15:53 上传

文件大小: 163 KB
下载次数: 0