找回密码
 立即注册
The工件workpiece切削 | 邮电通讯系统 2022-08-10 68 0star收藏 版权: . 保留作者信息 . 禁止商业使用 . 禁止修改作品
选用PCBN刀具精车淬硬钢,其工件硬度高于45HRC,作用最佳。其切削速度一般为80~120m/min,工件硬度越高,切削速度宜取低值,如车硬度为70HRC的工件,其切削速度宜选60~80m/min。精车的切深在0.1~0.3mm,进给量在0.05~0.025mm/r,精车后的工件表面粗糙度为Ra0.3~0.6μm,标准精度可达0.013mm。若

(The PCBN tool is used to finish turning hardened steel, and its workpiece hardness is higher than 45HRC, which has the best effect. The cutting speed is generally 80-120m/min. The higher the hardness of the workpiece, the lower the cutting speed should be. For example, the cutting speed of a workpiece with a turning hardness of 70HRC should be 60-80m/min. The depth of cut of the finishing machine is 0.1~0.3mm, the feed rate is 0.05~0.025mm/r, the surface roughness of the workpiece after finishing turning is Ra0.3~0.6μm, and the standard precision can reach 0.013mm. like)

[下载]22371503800.rar




上一篇:虚拟机VMware在网络实用技术实验教学中的研究
下一篇:VoIP解决方案及双处理器实现架构分析