找回密码
 立即注册
Theclient客户机密码 | 邮电通讯系统 2022-06-30 83 0star收藏 版权: . 保留作者信息 . 禁止商业使用 . 禁止修改作品
网吧网络系统还原软件安装说明:1、服务端无须安装,解压后运行使用,选择网卡,第一次运行密码为空。2、运行客户端安装程序后,点击“安装”即完成安装。注:安装后可直接进行镜像文件封装,因为此时还并不具备还原功能,需在服务端选择目标客户机安装还原驱动才能开始工作。提示:客户端快速安装命令行方式ClientNet.exe/Install3、服务端执行“安装还原驱动”选择目标客户机设置保护分区“确定”后客户机自动重启完成全部操作。服务器端操作说明:1、服务端第一次进入时密码为空;2、系统-参数设置:如果有多网段设置请选择不同的网卡进行控制不同网段的机器。注意,多网段网络安装时不同网段的客户机还原时,服务段请选择对应的网卡进行控制安装。3、系统-修改密码:同时修改服务端的登陆密码和在线客户端密码,两者应该同一密码。当客户端不在线的时候,客户端密码不会被修改,请使用客户端密码校正功能进行校正(注意:如果服务端和客户端密码不一致时,服务端将无法控制客户端)。4、操作-设置状态:选择目标客户机需要修改的分区,点“修改”选择分区保护状态,修改完成然后“设置”即完成操作。该功能简单理解为,设置单台电脑的还原分区保护状态。5、操作-设置命令:选择目标客户机需要修改的分区,点“修改”选择分区所需执行的命令,修改完成然后“设置”即完成操作。该功能简单理解为,执行单台电脑的还原分区状态更新。6、操作-批量设置状态及命令:可以多选客户机同时进行分区状态、命令的设置。7、操作-安装还原驱动:选择目标客户机,设置需保护的分区“确定”即可完成还原驱动的安装。客户机自动重启并完成设定。8、操作-卸载客户端:选择目标客户机,点“确定”即可卸载客户端。客户机自动重启并完成设定。9、操作-校正客户端密码:选择目标客户机,输入客户端密码,客户端默认密码为安装还原驱动时的密码。校正通过后客户机密码自动变更为服务段登陆密码。注意事项:1、服务端的登陆密码和客户端的还原密码应该保持一致。注:第一次运行安装客户端,默认是无密码可被任意服务器端控制。只有当在服务端上选择目标客户机并安装还原驱动后,才存在密码!而这个密码就是当前服务端的登陆密码。如果服务端和客户端密码不一致时,服务端将无法控制客户端。请使用客户端密码校正功能同步密码后才能控制客户端。2、安装客户端后并不能还原分区,只有在服务端执行“安装还原驱动”后,才开始工作。3、与菜单的配合,只需在菜单服务端设置中,填写正确的还原密码以及设置还原分区即可。注:游戏更新分区内不能存放虚拟内存文件。如果选择全盘保护,菜单客户端必须放在客户机游戏更新分区。并不能通过菜单服务端修改还原密码。4、还原服务端对目标客户机的C盘以及页面文件所在盘进行的任何操作客户机都会自动重启。5、建议,单一保护分区大小40~60G。网络游戏与单机游戏放不同分区。
本资料共包含以下附件:
Common.dll
RestorNet.exe
ClientNet.exe
fakedisk.sys
购买方法.txt
使用说明.txt
服务器端
客户端....


(Internet cafe network system restore software installation instructions: 1. The server does not need to be installed. It can be run after decompression. Select the network card, and the password for the first run is empty. 2. After running the client installation program, click "Install" to complete the installation. Note: after installation, you can directly package the image file, because the restore function is not available at this time. You need to select the target client on the server to install the restore driver before starting to work. Prompt: client quick installation command line clientnet Exe/install3. The server executes "install restore driver" and selects the target client to set the protection partition. After "OK", the client automatically restarts to complete all operations. Operating instructions on the server: 1. The password is blank when the server enters for the first time; 2. System - parameter setting: if there are multiple network segments, please select different network cards to control the machines in different network segments. Note: during multi segment network installation, when clients of different network segments are restored, please select the corresponding network card for control installation. 3. System - modify password: modify the login password of the server and the password of the online client at the same time. Both passwords should be the same. When the client is not online, the client password will not be modified. Please use the client password correction function to correct it (Note: if the server and client passwords are inconsistent, the server will not be able to control the client). 4. Operation - set status: select the partition to be modified by the target client, click Modify to select the partition protection status, and then click set to complete the operation. This function is simply understood as setting the restore partition protection status of a single computer. 5. Operation setting command: select the partition to be modified by the target client, click Modify to select the command to be executed by the partition, and then click set to complete the operation. This function is simply understood as updating the restore partition status of a single computer. 6. Operation - batch setting status and command: you can select multiple clients to set partition status and command at the same time. 7. Operation - install restore driver: select the target client, set the partition to be protected, and click OK to complete the installation of the restore driver. The client automatically restarts and completes the setting. 8. Operation - uninstall client: select the target client and click OK to uninstall the client. The client automatically restarts and completes the setting. 9. Operation - correct client password: select the target client and enter the client password. The default password of the client is the password when the restore driver is installed. After the correction, the client password is automatically changed to the login password of the service section. Notes: 1. The login password of the server should be consistent with the restore password of the client. Note: when running the installation client for the first time, the default is no password and can be controlled by any server. The password only exists when the target client is selected on the server and the restore driver is installed! This password is the login password of the current server. If the server and client passwords are inconsistent, the server will not be able to control the client. Please use the client password correction function to synchronize passwords before controlling the client. 2. The partition cannot be restored after the client is installed. The partition cannot be restored until the server executes "install restore driver". 3. To cooperate with the menu, just fill in the correct restore password and set the restore partition in the menu server settings. Note: virtual memory files cannot be stored in the game update partition. If global protection is selected, the menu client must be placed in the client game update partition. The restore password cannot be modified through the menu server. 4. Any operation performed by the restore server on the C disk of the target client and the disk where the page file is located will automatically restart the client. 5. It is recommended that the size of a single protection partition be 40~60g. Online games and stand-alone games are divided into different zones.
This document contains the following attachments:
Common. dll
RestorNet. exe
ClientNet. exe
fakedisk. sys
Purchase method txt
instructions. txt
Server side
client....)

[下载]14250235537.rar




上一篇:桌面监控软件
下一篇:Novell网络操作系统及应用