找回密码
 立即注册
串口Driverthe驱动 | 邮电通讯系统 2022-06-30 81 0star收藏 版权: . 保留作者信息 . 禁止商业使用 . 禁止修改作品
usbtor232,usb转串口驱动,下载解压后点击Y-105Driver安装即可。usb转串口通用驱动使用说明:在win98/me/2000/xp系统中,打开软件包中的SETUP里Y-105Driver文件双击安装。安装完成后,连接好电脑与配置的设备,您可能在设备管理器的“端口“中看到虚拟的串口设备。(usb转串口驱动是不是万能不能确认,但确认配置maipu,华为路由器是没有问题的。)
本资料共包含以下附件:
DRemover98_2K.exe
ser2pl.sys
SER9PL.sys
SERSPL.INF
SERSPL.VXD
SERWPL.INF
Y-105
用户必读.doc
98ME_20011_2kXP_20024
INF
SETUP
Y-105
usbtocom....


(Usbtor232, USB to serial port driver. After downloading and decompressing, click y-105driver to install it. Instructions for USB to serial port universal driver: in win98/me/2000/xp system, open the y-105driver file in setup in the software package and double-click to install it. After installation, connect the computer to the configured device, and you may see a virtual serial port device in the "port" of the device manager. (whether the USB to serial port driver is universal cannot be confirmed, but the Huawei router is OK if you confirm to configure the Maipu.)
This document contains the following attachments:
DRemover98_ 2K. exe
ser2pl. sys
SER9PL. sys
SERSPL. INF
SERSPL. VXD
SERWPL. INF
Y-105
User must read doc
98ME_ 20011_ 2kXP_ twenty thousand and twenty-four
INF
SETUP
Y-105
usbtocom....)

[下载]11214570233.rar




上一篇:海蜘蛛软路由教程
下一篇:Wireshark使用教程用户手册