找回密码
 立即注册
the可以桥接接口 | 邮电通讯系统 2022-06-29 67 0star收藏 版权: . 保留作者信息 . 禁止商业使用 . 禁止修改作品
解压密码:lpcisco?1、H3C万能机架既可以模拟路由器又可以模拟交换机,无需繁琐配置,开启即可用。2、我添加的是8个E0/0/X口,默认是路由口,可以在接口模式下输入命令转换成交换口,这样就成了交换机了。实验中主要这些接口。万能组网图中标明了接口的桥接情况。可以自由组网3、其中的E0/4/X默认的交换口都不能用,因为我没有给它们桥接。这些接口都没什么用。4、E0/1/0接口既可以做路由口又可以用来桥接电脑5、里面还带了WinPcap3.0的网络抓包器,使用万能机架前先安装抓包器。还有securecrt工具
本资料共包含以下附件:
....


(Decompression password: lpcisco? 1. H3C universal rack can simulate both routers and switches. It can be used immediately after opening without cumbersome configuration. 2. I added 8 e0/0/x ports, which are the routing ports by default. In the interface mode, you can enter commands to convert the transaction ports. In this way, it becomes a switch. These interfaces are mainly used in the experiment. The universal networking diagram indicates the interface bridging. Free networking is allowed. 3. The default exchange ports of e0/4/x cannot be used because I have not bridged them. These interfaces are useless. 4. The e0/1/0 interface can be used as both a routing port and a bridge computer. 5. It also has a winpcap3.0 network packet grabber. Install the packet grabber before using the universal rack. And the SecureCRT tool
This document contains the following attachments:
....)

[下载]09570979141.rar




上一篇:lansee
下一篇:局域网查看工具 V1.34