(Tips for using the Xe netgram tool: the first time you run the PXE netgram tool, you will extract the data folder, which contains the software required by netgram, as follows: support GHO files in remote shared directories, such as //192.168.0.251/share/client GHO (convenient) can establish an independent network segment with high speed and little impact (GHO files must be on the local computer) (trouble) data\boot Pxetftpd32 boot file data\drados Imgdosimg image data\ghostsrv Exesymantecghostcast11.0.2.1573 Netcom server data\tftpd32 Exetftpd32v2.80pxe boot server (version can be changed by itself) data\tftpd32 Initftpd32 configuration file PXE netlock tool build100309 version update instructions (march9,2010) the IP address segment will use the first three bits of the local IP backup system. By default, the highest compression level of Z9 will be used to repair the problem with the backup function password (the password cannot be greater than 10 characters). When backing up the system, the pagefile of each partition on the disk will be automatically cleared Sys page file (can reduce the image volume)
This document contains the following attachments:
PxeTool. exe
Software introduction txt
PXE netlock tool: fast network cloning, support for multiple network segments)
收藏
