(Software introduction before using this software, first make sure that the router is not bound to the MAC address of the client, turn off the DHCP service, and use GHO files packaged with ghost8.2 or ghost8.3. Blue sand is not allowed! Also, DHCP parameters must be on the same network segment! Lansha hard disk express overview lansha express network version is the latest network cloning tool software launched by Nanjing lansha Information Technology Co., Ltd. This system can realize fast data backup and cloning of single computer and network. All operations are carried out on windows without booting to DOS. When cloning, the hard disk DMA mode is automatically turned on, which is efficient and safe; The powerful driver kernel can automatically analyze memory mapping and other files, greatly reducing the total amount of backup data; Support automatic analysis of NTFS, FAT16 and FAT32; The network clone kernel performs fast data compression while sending, embeds SSE and P4 optimization instructions, supports AMD and Intel dual core CPU architecture, and gives full play to the hardware performance; The software interface adopts flash Wizard mode. All operations are simple, clear, convenient and practical. It is the fastest and most efficient data cloning scheme in history. The main functions and functions of lansha hard disk express 1: clone the current hard disk partition to multiple external hard disks, with an average speed of 2.0g per minute. There is no need to use DOS boot disk. It is convenient and fast to operate directly under windows; Function 2: back up the current hard disk partition as a mirror file. It supports three compression algorithms: fast compression, normal compression and maximum compression. The average speed is 1.0g per minute. Each partition is stored as a separate file; Function 3: expand disk image files to multiple external hard disks, with an average speed of 3.5G per minute; Function 4: the client does not need any operating system. It only needs to support PXE boot or CD-ROM boot. The server automatically sends the current hard disk partition to the client through tcp/ip protocol. It supports IDE, SATA, SATA2 and other hard disks, 100m, Gigabit networks, more than 1000 network cards, Intel and amd dual core CPU optimization, and the average speed is 600m per minute. Function 5: the client does not need any operating system. It only needs to support PXE boot or CD-ROM boot. The server automatically sends the disk image backed up by the client to the client through tcp/ip protocol. It supports IDE, SATA, SATA2 and other hard disks, 100m and Gigabit networks, more than 1000 network cards, Intel and AMD dual core CPU optimization, and the average speed is 900m per minute. This document contains the following attachments:
Blue sand quick does not need to do the PXE net gram animation tutorial of the image file exe
Lansha hard disk express 1.2 enhanced version exe....)