TPFanControl v0.62 + 汉化补丁
这是老外开发的IBM电扇控制程序，能自己控制电扇滚动的温度和速度。我仅仅是对界面进行了汉化，而且修改了乱码问题。打开编辑fancontrol.ini文件，改动active=1，默以为0，退出，运行fancontrol.exe，选择mode为smart即可通过程序控制电扇滚动速度。温度控制值在fancontrol.ini文件中可改动。我的测试成果，如果温度选择48度-52度电扇转速1，在CPU降频使用时，电扇的转速噪音基本能够疏忽，电扇启停的份额大概是1：1，如把电扇风量固定选1，则CPU温度在45~46度之间改变。如今感受要是能最小化就好了，这个程序通过我昨日一黑夜的下载工具的测试来看，仍是不错的，按上面的设定，CPU温度就没超过52度，应当没什么大碍。这个程序一关闭，电扇的控制权就交给BIOS了。最新版v018，添加可疏忽一些温度的选择。fancontrol.ini的设置：1：Active=(0,1,2)设置电扇控制程序的状况，0为不控制，1为容许控制，2为启动后就自动控制；2：Cycle=5设置检测温度的时刻距离，5为5秒；3：MinimizeToSysTray=(0,1)设置最小化时的状况，0为不改变，1为最小化到系统托盘；4：MinimizeOnClose=(0,1)设置选择关闭程序时的状况，0为关闭，1为最小化到系统托盘；5：StartMinimized=(0,1)设置程序启动时是最小化仍是躲藏到系统托盘，0为最小化，1为到系统托盘；6：IconLevels=505560选择系统图标三种色彩代表的温度，第一位对应黄色，第二位对应橙色，第三位对应赤色；7：FanBeep=11设置电扇启动和中止的时刻，单位为ms；8：MaxReadErrors=10设置在呈现读温度值错误的次数，程序将转入BIOS控制；9：IgnoreSensors=PWR,YYY,ZZZ设置程序疏忽控制的温度项目，填入相应的名称，则程序将不思考此项温度值；10：Level=480Level=511Level=554Level=607Level=70128设置程序控制的温度值和相对应的电扇转速，按系统各部件的最高温度控制；本资料共包括以下附件：
TPFanControlv0.62\汉化补丁\TPFanControl.exe
TPFanControlv0.62\Readme.txt
TPFanControlv0.62\thinkpad电扇.exe
(This is an IBM fan control program developed by foreigners, which can control the temperature and speed of the fan rolling by itself. I just Chineseized the interface, and modified the garbled problem. Open and edit the fancontrol.ini file, change active=1, the default is 0, exit, run fancontrol.exe, and select mode as smart to control the scrolling speed of the fan through the program. The temperature control value can be changed in the fancontrol.ini file. According to my test results, if the temperature is 48-52 degrees, the fan speed is 1. When the CPU is used at a reduced frequency, the speed noise of the fan can basically be ignored, and the ratio of the start and stop of the fan is about 1:1. , the CPU temperature changes between 45 and 46 degrees. It would be nice if it could be minimized now. This program is still pretty good through the test of my download tool yesterday and night. According to the above settings, the CPU temperature does not exceed 52 degrees, so it should be no problem. As soon as this program is closed, control of the fan is handed over to the BIOS. The latest version, v018, adds the option to ignore some temperature. The settings of fancontrol.ini: 1: Active=(0,1,2) sets the status of the fan control program, 0 means no control, 1 means allowable control, 2 means automatic control after startup; 2: Cycle=5 sets the detection temperature The time distance, 5 is 5 seconds; 3: MinimizeToSysTray=(0,1) sets the status when it is minimized, 0 means no change, 1 means it is minimized to the system tray; 4: MinimizeOnClose=(0,1) Set the selection to close The status of the program, 0 is closed, 1 is minimized to the system tray; 5: StartMinimized=(0,1) Set whether the program is minimized or hidden to the system tray when it starts, 0 is minimized, 1 is to the system tray ;6: IconLevels=505560 Select the temperature represented by the three colors of the system icon, the first one corresponds to yellow, the second one corresponds to orange, and the third one corresponds to red; 7: FanBeep=11 sets the fan start and stop time, the unit is ms ;8: MaxReadErrors=10 sets the number of times that the reading temperature value is wrong, the program will transfer to BIOS control; 9: IgnoreSensors=PWR,YYY,ZZZ set the temperature items that the program neglects to control, fill in the corresponding name, the program will not be Consider this temperature value; 10: Level=480Level=511Level=554Level=607Level=70128 Set the temperature value controlled by the program and the corresponding fan speed, and control it according to the maximum temperature of each component of the system;
This document includes the following attachments:
TPFanControlv0.62\Chinese patch\TPFanControl.exe
TPFanControlv0.62\Readme.txt
TPFanControlv0.62\thinkpad fan.exe)
页:
[1]